TOKYO–Toshiba Corporation's (TOKYO: 6502) Storage & Electronic Devices Solutions Company today announced the launch of “TBD62089APG”, a new-generation transistor array for applications such as LED lighting for amusement equipment and high voltage signal transmitters for industrial equipment. The new IC incorporates D-type Flip Flop circuits (8 bit type) in the input part that support a data storage function. Sample shipments start today with mass production scheduled to start at the end of December 2016.

Applications such as amusement equipment (pachinko and slot machines), home appliances (air conditioners and refrigerators), and industrial equipment (vending machines, banking terminals such as ATMs, office automation equipment, and factory automation equipment) continue to add functions year by year, resulting in a shortage of mount area for ICs.

The TBD62089APG integrates D-type Flip Flop circuits, widely adopted as an industry standard, and an 8-ch sink output[1] type transistor array (TBD62083APG) on a single chip in a DIP20 package. As a result, both the component count and the area required for mounting can be reduced.

The TBD62089APG also has a DMOS FET[2] sink output that supports high-voltage and large-current drive with high efficiency, allowing it to cut power loss by about 40%[3] compared with the preceding TD62083A series. This realizes operation with an output margin and lower power loss. Operating as an output load, the new IC is suitable for driving resistance and capacitance loads (LEDs and photo couplers).

Main Features of New Product

1. Built in data storage function (D-type Flip Flop circuit)

D-type Flip Flop circuits (TC74HC273A type) are incorporated in the output circuit of the 8-ch sink output type transistor array, TBD62083APG, which is another of Toshiba’s new-generation transistor arrays. This reduces component count and mounting area.

2. High efficiency drive

Integration of TBD62083APG realizes a high efficiency drive, and the TBD62089APG cuts power loss by about 40%[3] compared to the preceding TD62083A series.

3. High-voltage, large-current drive

The absolute maximum rating of the output is 50V/0.5A.

Applications

Amusement equipment (pachinko and slot machines), home appliances (air conditioners and refrigerators) and industrial equipment (vending machines, banking terminals such as ATMs, office automation equipment, and factory automation equipment).

Main Specifications

Part Number		TBD62089APG
Function		D-type Flip Flop circuits + Transistor array
Package		DIP20
Input part	Composition	D-type Flip Flop circuit × 8ch
	I/F	CMOS level input
	VCC	3.0V to 5.5V
	CLK frequency	20MHz
Output part	Composition	Sink-type DMOS FET × 8ch
	Output rating (Voltage)	50V
	Output rating (Current)	500mA
	Output ON resistance	2Ω (typ.)
	Common diode	None

[1] Sink output: a type of current output (Pull type).

[2] DMOS FET: Double-Diffused MOSFET

[3] In the condition of Ta=25℃ and IOUT is 200mA.

For more information about the new product, please visit:

http://toshiba.semicon-storage.com/info/lookup.jsp?pid=TBD62089APG&region=apc&lang=en

Source：http://www.semicon.toshiba.co.jp/eng/