Manufacturers

新闻中心

EMC components: TDK announces new automotive noise suppression filters for MF and HF bands

2020-09-15 | 返回
> Demonstrates impedance in high MF and HF bands
> Employs newly developed high-loss, highly permeable ferrite
> Operates in temperatures up to 125 ℃
> AEC-Q200 compliant

September 15, 2020

TDK Corporation announces that it has developed the MHF1608 series of HF band* noise suppression filters for automobiles, and will begin mass production in September 2020.

The noise suppression component will be inserted in signal lines for electronic control circuits in automotive applications including car audio, navigation, and battery monitoring systems. Signal transmission paths are often affected by conduction, radiation noise, or other impacts. To control these noises, a chip bead supporting a high frequency band from several dozens of MHz to several GHz is typically inserted.

The MHF series uses a newly developed high-loss, highly permeable ferrite material, which results in high impedance from 300 (KHz) to 30 (MHz), even lower than the frequency band above, while minimizing and controlling noise. Replacing conventional chip beads with this product enables manufacturers to reduce the number of parts used. It is wide temperature range from -55 ℃ to +125 ℃ and also qualified in accordance with AEC-Q200.

In the future, TDK will further expand the MHF series lineup to enable more compact electronic equipment and increased noise suppression across a broad range of automotive equipment.

Glossary
The MF frequency band is from 300 to 3000 KHz while the HF band is from 3 to 30 MHz.

Main applications
Car audio, car navigation, battery monitoring systems (BMS), and various types of electronic control units for automobiles

Main features and benefits
> High impedance in the MF and HF bands, suppressing noise
> Newly developed high-loss and highly permeable ferrite material employed, resulting in reduction of noises up to 30 MHz
> Operating temperature range from -55 ℃ to +125 ℃

Key data

Type

Impedance
[
]typ.
@1MHz

Impedance
[
]typ.
@10MHz

Impedance
[
]typ.
@100MHz

DC resistance
[
]
max.

Rated current
[
]
max.

MHF1608BAC352ATD25

380

3500

1600

1.8

170

MHF1608BAC252ATD25

280

2500

1800

1.6

200

MHF1608BAC182ATD25

220

1800

1800

1.4

250

MHF1608BAC601ATD25

80

600

1200

0.6

350


Source:http://www.tdk.com/