Manufacturers

新闻中心

ROHM’s New Class-Leading* Low ON Resistance Nch MOSFETs:

2023-05-31 | 返回
40V-150V breakdown voltage lineup: ideal for motor drive and industrial power supplies

ROHM has developed Nch MOSFETs (40V/60V/80V/100V/150V) RS6xxxxBx / RH6xxxxBx series, 13 part numbers, suitable for applications operating on 24V/36V/48V power supplies such as base stations, servers, and motors for industrial and consumer equipment.

In recent years, worldwide power consumption has been on the rise – driving the need for industrial equipment such as servers and base stations along with various motors to become more efficient. In a number of these applications that utilize medium voltage MOSFETs, used in a variety of circuits, manufacturers are demanding even lower power losses. However, general MOSFETs are characterized by two main parameters leading to power losses: ON resistance (RDS(on)), which is inversely proportional to chip size, and Gate-drain charge (Qgd) that increases proportionally with chip size, making it challenging to achieve both. ROHM has improved the trade-off between the two by adopting copper clip connections and improving the gate structure.

The new MOSFETs achieve an industry-leading RDS(on) of 2.1mΩ – approx. 50% lower than conventional – by increasing device performance and adopting the HSOP8/HSMT8 package featuring low-resistance copper clip connections. What’s more, improving the element gate structure reduces Qgd, which is generally in a trade-off relationship with RDS(on), by approx. 40% vs conventional products (comparing typical values for RDS(on) and Qgd for 60V HSOP8 package products). These improvements reduce both switching and conduction losses, greatly contributing to higher application efficiency. As an example, when comparing the efficiency of a power supply evaluation board for industrial equipment, ROHM’s new products achieve an industry-leading efficiency of approx. 95% (peak) in the output current range during steady-state operation.

Going forward, ROHM will continue to develop MOSFETs with even lower RDS(on) that reduce power consumption in a variety of applications, contributing to solving social issues such as environmental protection through energy conservation.

 

Product Lineup

Part No.

ID[A]
TC=25°C

RDS(on)[mΩ]

Qg[nC]

Qgd
[nC]

VGS=10V

VGS=10V

VGS=6V

VGS=4.5V

Typ.

Max.

Typ.

Typ.

Typ.

Typ.

RS6G120BG

120

1.03

1.34

67

-

34

12

RS6G100BG

100

2.6

3.4

24

-

11.8

4.3

RS6L120BG

120

2.1

2.7

51

-

25

7.3

RS6L090BG

90

3.6

4.7

28

-

14

4.1

RS6N120BH

120

2.8

3.3

53

33

-

10.1

RS6P100BH

100

4.5

5.9

45

29

-

11.7

RS6P060BH

60

8.2

10.6

25

16.2

-

6.3

RS6R060BH

16.7

21.8

46

30

-

12

RS6R035BH

35

32

41

25

16.2

-

6.4

RH6G040BG

40

2.8

3.6

25

-

11.8

4.5

RH6L040BG

5.5

7.1

18.8

-

9.2

2.7

RH6P040BH

12

15.6

16.7

10.9

-

4.4

RH6R025BH

25

46

59

16.7

11

-

4.4


Application Examples

◇ Power supplies for servers and communication base stations
◇ Motors for industrial and consumer products
Also suitable for a variety of power supply circuits and motor-equipped devices

Terminology

Nch MOSFET
A type of MOSFET that conducts when a positive voltage is applied to the Gate relative to the Source. Nch MOSFETs are more widely distributed in the market today due to their lower ON resistance (RDS(on)) over Pch variants, facilitating use in a broad range of circuits.
ON Resistance (RDS(on))
The resistance value between the Drain and Source while the MOSFET is ON. The smaller this value is, the lower the (power) loss during conduction.
Qgd (Gate-Drain Charge)
The amount of charge when charging the capacitance between the Gate and Drain after the MOSFET turns ON. Lower values allow for faster switching that leads to lower switching loss (power loss).

Featured Products


Ideal for Base Station/Server Power Supplies and Industrial/Consumer Motor Drive
Low ON-Resistance Nch Power MOSFETs (Cu Clip Type)
RS6xxxx / RH6xxxx series (PDF:1.2MB)


Source: http://www.rohm.com