Manufacturers

新闻中心

New Product NC2600 Series, Step-down DC/DC Switching Regulator

2022-10-12 | 返回
○ 4 MHz High-speed Switching Technology for Small Footprint Solution
○ PWM/PFM Auto Switching Mode Function, Synchronous Rectification, and Maximum Output Current of 2 A

Nisshinbo Micro Devices Inc. has launched the NC2600 Series, a synchronous rectification and a maximum output current of 2A step-down DC/DC switching regulator with a PWM/PFM auto switching mode function.

Recently, as products have been miniaturized, the limitation of the board area where electronic components can be mounted has become increasingly severe. In many cases, the area available for power management ICs has also been limited. Furthermore, in battery-powered applications, power management ICs are increasingly required to be highly efficient to prolong the life of batteries.

The NC2600 series is a synchronous step-down DC/DC switching regulator with 4 MHz switching frequency. Two small packages are available: the WLCSP-8-P11, a small 1.62 x 0.98 x 0.4 (mm) package, and the DFN2020-8-GT (under development), a 2.0 x 2.0 x 0.6 (mm) surface-mount type for easy mounting. Since this product is designed to operate even with peripheral components with small external dimensions, power management components including peripheral components can be placed in a small footprint area.

The NC2600 series has an input voltage range of 2.3 V to 5.5 V and a maximum rating of 6.5 V. The output voltage is available in two types: a fixed voltage type where the output voltage is set internally in the IC, and a voltage adjustable type where the output voltage is set by external resistors.

The NC2600 series supports a maximum output current of 2 A. In addition, it is equipped with a function that automatically switches between PFM (Pulse Frequency Modulation) mode and PWM (Pulse Width Modulation) mode depending on the output current to enable efficient voltage conversion at light load. This function enables the product to achieve both responses to heavy load and high efficiency at light load.

In addition, since this product has a power good function and a variable soft-start time function, external components for sequence control of power supply are not required when driving devices that require multiple voltages, and sequence control can be easily realized by using this product.
NC2600 series (From left, the WLCSP-8-P11 and the DFN2020-8-GT (under development) packages)

Product name

NC2600 Series

Package

WLCSP-8-P11
DFN2020-8-GT (under development)

Sample Price (reference price when purchasing 1000 units)

JPY 110 (Tax Included) *

Sample Order Start Date

October 12, 2022

Mass Production Start Date

October 12, 2022

Monthly Production

1 million

* The price is based on the consumption tax rate as of October 2022.

Main Features of NC2600 Series

1. Small Footprint Solutions

While the NC2600 series supports a maximum current of 2 A, since it uses a small package of WLCSP-8-P11 (1.62 x 0.98 mm) and is also designed to operate even with peripheral components with small external dimensions, power management components including peripheral components can be placed in a small footprint area.


2. PWM/PFM Auto Switching Mode

Since the NC2600 series has a PWM/PFM auto switching mode function that automatically switches between PWM mode and PFM mode depending on the output current, it achieves high efficiency at both light and heavy load. (This function is enabled when a "L" signal is input to the MODE pin.)

Example of Characteristics (Efficiency)

Main Specifications of NC2600 Series

Input Voltage Range (VIN)

2.3 V to 5.5 V (Maximum Rating 6.5 V)

Output Voltage Range (VSET)

Fixed Output Voltage Type: 0.6 V to 3.3 V (0.1 V step)
Adjustable Output Voltage Type: 0.6 V to 5.5 V, adjustable in this range

Feedback Voltage and Accuracy

0.6 V ±9 mV

Output Voltage Accuracy

±1.5% (VSET  1.2 V)
±18 mV (VSET < 1.2 V)

Operating Temperature Range

-40°C to 85°C

Switching Frequency

4.0 MHz (Typ)

Build-in Functions

Under Voltage Lock Out, Thermal Shutdown, Power Good, Soft-start Time (adjustable), Latch Protection, etc.

Package

WLCSP-8-P11: 1.62 x 0.98 x 0.4 (mm)
DFN2020-8-GT: 2.0 x 2.0 x 0.6 (mm) *under development


Click to view For more details about the NC2600 series.

Source: https://www.nisshinbo-microdevices.co.jp